The difference between upright and inverted is simply that the upright sample is placed below and the inverted sample is placed above. The upright objective is facing downwards, and the inverted objective 'is facing facing upwards.
Obrnuti metalografski mikroskop, due to the fact that the observation surface of the sample coincides with the surface of the workbench, and the observation objective is located below the workbench for upward observation, this observation form is not limited by the height of the sample. When preparing the sample, only one observation surface is flat, so it is commonly used in factory laboratories, scientific research institutions% 2c i sveučilišta za nastava. The base of the inverted metalografski mikroskop has a large supporting area, a low center of gravity, and is stable and pouzdan. The eyepiece and supporting surface are tilted at 45 Degree , Making Observation Comfortable.
The upright metalografski mikroskop has the same basic functions as the inverted metalografski mikroskop. In addition to analyzing and identifying metal samples with a height of 20-30}mm, it is more widely used in transparent, semi transparent, or neopaque materials because it conforms to human daily habits. An uspravno metalografski mikroskop oblici a pozitivno slika trajanje promatranje, which brings great convenience to the korisnik's observation and diskriminacija. In addition to analyzing and identifying metal samples with a height of 20-30mm, observation targets veći than 3 microns but smaller than 20 microns, such as the surface structure and traces of materials such as cermets, electronic chips, printed circuits, LCD supstrati, thin films, fibers, granular objects, coatings, etc., can all have good imaging Effects.
