Kako to mjera AC volta s a digitalno multimetar
1, zupčanik odabrano AC voltage blok, when you do not know the voltage range, should be selected from the maximum range.
2,Meter treba be connected in parallel with the circuit or component to be measured.
Mjerenje koraci od AC napon
Step 1: Turn on the power switch of the digital multimeter and rotate the multimeter to the AC voltage range of 750V.
Korak 2: Turn on the power switch in the circuit.
Step 3: Measure the voltage between 1-2 points and record the reading, the voltage value is measured as: 220V.
Step 4: Rotate the multimeter to AC voltage range of 20V, measure the voltage between points 3-4, 4-5, 6-7} respectively and record the readings.
(1) Mjera the napon između točaka 3-4: 10V.
(2) The voltage measured between points 4-5 is 10V.
(3) The voltage measured between points 6-7 is: 6.2V.
1, if You Do Not Know The Measured Voltage Range Will Function Switch To The Maximum Range And Postupno Down.
2,If the display only shows 1, it means that the range is too small and the function switch should be placed in a higher range.
3,Indicates that do not measure voltage higher than 1000V, display higher voltage value is possible, but there is a risk of damage to the internal ožičenje.
4, When mjer high naponi, take extra care to avoid electric shock.
