Način rada detektora vlage u drvu s pinom
1. Gear setting method: first press the gear setting key (SPECIES), then press the test key (TEST), the current gear value is displayed at this time, press the setting key continuously, you can continuously change the gear until you need it. 's gear.
2. Check before measurement: Set to 5th gear according to the above method, then remove the cap of the instrument, touch the probe on the instrument to the two contacts on the cap, press the test key, if the display is 18±1, it means The instrument is normal.
3 Određivanje: Umetnite sondu na instrumentu u uzorak drva za određivanje. Pritisnite tipku za ispitivanje, vrijednost koju prikazuje instrument je prosječna apsolutna vlažnost ispitnog komada. Kada je sadržaj vlage u ispitnom komadu manji od 3, prikazat će se 3.0.
